Starter cable for HiluX HighPower SMD – incl. end plug
Make the installation of your HiluX HighPower SMD LED strip even easier with this specially designed starter cable. The set is “plug-and-play”: Plug the cable directly into the socket, click it onto the strip – and get light in seconds.
Adapted for long runs
The cable is dimensioned to supply up to 100 meters of LED strip without additional drivers or adapters. If you need to run lights all the way around a showroom, a restaurant or a large kitchen, you get the necessary voltage from one 230 V connection.
Fully dimmable
The starter cable is compatible with standard wall dimmers that use phase or triac dimming. This means you retain the seamless light control you know from traditional light sources.
Easy and safe assembly
Overall dimensions: 24 mm wide × 17 mm high – fits the HiluX HighPower SMD strip exactly.
Included end cap closes opposite strip ends, protecting conductors and copper tracks from dust.
Two pieces of 5 cm Ø20 mm heat shrink tubing are included; push them onto the joint, heat slightly, and you have a robust, insulated transition.
Indoor solution
With an IP20 rating, the cable is not water or moisture resistant and should be installed in dry environments such as living rooms, shops, offices or showrooms.
